Minimize down times and reduce operating costs with an AIR Industrial wind turbine.
AIR tower kits are available in roof mount, 27' (8.1m) and 45' (13.5m) heights. These kits are Professional Engineer Certified (PE Certified). Each tower kit comes with all hardware necessary to install a tower, except guy supports, pipe and cement. All parts bolt or clamp together and no welding is required. Purchase 1-7/8" steel tubing from chain link fence supplier. Roof mounts include vibration isolators, wall brace clamps and a safety leash, but do not include pole or lag screws.
Air Industrial Wind Generator
Click To Enlarge
- Item #: Air403
- Manufacturer: Southwest Wind Power
- Condition: New
|
Regardless of the environment or application, Southwest Windpower has the wind turbine that can meet your needs. From offshore to mountain tops to global expeditions, the AIR Industrial is sure to keep your batteries charged. |
||||||||||||
|
Based on the world's best selling wind turbine, the AIR Industrial has been designed to survive the harshest mountain-top and offshore sites. When the AIR Industrial is combined with a solar array, you will experience a more consistent power supply by evening-out seasonal changes and weather fluctuations. No need for a separate tower! The AR's low wind loading and light-weight design allow it to be mounted on existing structures within a few hours. In summary:
Utilize the Air Industrial with solar and have power in virtually any weather condition, all year round, at just about any remote site. FEATURES:
"We are confident in the hybrid concept and have installed Hybrid DC Power Systems in the Gulf of Mexico using the AIR Industrial. The end result of our research is a highly reliable Hybrid DC Power System at a cost savings in excess of $9,000! The final result is a near perfect marriage of wind and solar power."
An external resistive load dump for is required for superior reliability in extreme wind conditions. Add your favorite charge controller/load diverter to both protect your batteries from overcharging and divert the excess power to the load to produce useful heat in winter storms! (Dump load and Charge Controller NOT included.) |
||||||||||||
|
||||||||||||
We also carry a 50 amp circuit breaker for 12V AIR403 systems, and the 30 amp circuit breaker for 24 and 48V systems. As an option, we also carry a 100 amp circuit breaker for special circumstances.
AIR Tower Kits
Earth auger sets
Screw-in "auger" type guy anchors can be used in loamy and gravelly soils. Other soil types may require concrete footings or expansion bolts. Consult an engineer or geologist if you have questions about guy supports.
AIR shutoff/circuit breaker
This interlocked pair of 60-amp circuit breakers protects wind-generator-to-battery wiring and allows you to disconnect and stop the wind generator for service. UL Listed breakers and NEMA 1 enclosure. For indoor mounting only. Can be used with all AIR-X wind generators.
|
Description |
Price |
|
AIR Marine tower hardware kit |
$220 |
|
9' AIR Marine aluminum mast and 2 stays |
$234 |
|
Roof kit without roof seal |
$120 |
|
Roof kit with roof seal |
$137 |
|
Roof seal – for roof mount kit |
$65 |
|
27' AIR guyed tower kit (AIR only) |
$190 |
|
45' AIR guyed tower kit (AIR only) |
$310 |
|
29’ EZ Tower kit including pipe and anchors |
$573 |
|
36" Auger – set of 4; use with 24' & 27' towers |
$129 |
|
36 Galvanized auger set of 4; for 24' & 27' towers |
$182 |
|
48 Auger set of 4 32' - 50' towers |
$140 |
|
48 Galvanized auger set of 4 32'-50' towers |
$214 |
|
AIR Shutoff/circuit breaker |
$172 |
|
30 amp circuit breaker kit |
$26 |
|
50 amp circuit breaker kit |
$26 |
|
100 amp circuit breaker kit |
$59 |
|
Amp meter kit |
$30 |
|
Stop Switch for Land Versions |
$33 |
|
Diversion load for Air Industrial |
$135 |
