PSPV - PV Array Combiner Box

• Rainproof, outdoor Type 3R powder coated aluminum enclosure
• Approved for installation on both vertical and angled surfaces with a slope as little as 3-in-12 pitch - also can be pole mounted (Brackets not included)
• Designed for use with up to twelve OutBack’s OBPV breakers for PV array configurations of 12 to 72 VDC systems - maximum open circuit voltage of 150 VDC
• Also can use up to eight of the OutBack OBFH “touch safe” type fuse holders for high voltage systems - maximum open circuit voltage of 600 VDC
• Includes dual combining bus bars which can be installed to provide one or two separate PV output circuits from a single PSPV enclosure
• Includes one terminal bus bar (TBB) and has mounting holes for an additional TBB
• Includes two #1/0 AWG set-screw compression type box lug terminals for output wiring
• Includes one #1/0 AWG ground lug which can be mounted either on the inside or outside surface of the enclosure
• Two 1 inch side knockouts which can be punched out to allow for larger 1.25" (3 cm) conduit
• Eight .5" (13 mm) knockouts on bottom for PV module or subarray input wiring
• Clearance is provided on bottom and back main knockouts to allow up to a 2" (5 cm) conduit punch for larger cabling
• For negative or positive ground PV systems
• Enclosure ships without breakers or fuse holders(Order separately)